Commercial Spearguns
Available in Teak, Rhino
and Mahogany

Model #

Gun
Size

Gun Style

Teak

PT42LC

42"

Commercial
Teak Limited

PT48LC

48"

Commercial
Teak Limited

PT52LC

52"

Commercial
Teak Limited

PT60LC

60"

Commercial
Teak Limited

Rhino

PR42LC

42"


Commercial
Rhino Limited

PR48LC

48"


Commercial
Rhino Limited

PR52LC

52"


Commercial
Rhino Limited

PR60LC

60"


Commercial
Rhino Limited

Mahogany

PM42LC

42"

Commercial
Mahogany
Limited

PM48LC

48"

Commercial
Mahogany
Limited

PM52LC

52"

Commercial
Mahogany
Limited

PM60LC

60"

Commercial
Mahogany
Limited



Commercial Bands
Variable Power
(2 bands per set)
Intended primarily
for Single Band
Freeshafting and Lineshafting

Variable Power Commercial Bands
Variable Power Bands offer three different power options and are intended primarily for single band freeshafting or lineshafting. The shorter amber band is the band used most often and is best for medium range shooting. The longer black band is used for shooting close range shots where less power is needed. Both bands would only be used when extra penetration is needed on a large fish or if you needed to make a long distance shot. If you primarily shoot with two bands, it is better to equip your speargun with two bands of similar length. Please consult the speargun specification chart to select the proper size bands for your speargun.

BC42

For 42" Commercial
Guns 5/8" dia.
20" Amber / 24" Black

BC48

For 48" Commercial
Guns 5/8" dia.
22" Amber / 28" Black

BC52

For 52" Commercial
Guns 5/8" dia.
24" Amber / 30" Black

BC60

For 60" Commercial
Guns 5/8" dia.
26" Amber / 32" Black

Can also be used
on Classic Style Guns









Back to top




Back to top



C106 — Line Release Clip (mounts under barrel)

C107 — Rear Slide Adjuster (mounts under butt)







Back to top

Previous: Limited Spearguns
Next: Speargun Specifications

Commercial Spearguns & Accessories


On this page:


For a comprehensive description of the Commercial gun and how to apply the gun's technology please click here.

The Commercial Speargun
The Commercial speargun represents a unique departure from conventional speargun designs and concepts. This speargun is the result of more than 20 years of spearfishing experience and technology developed by Spearfishing Specialties owner Kevin Bruington along with advice from many spearfishermen throughout Florida. This is the speargun Kevin used throughout most of his commercial spearfishing career. This technology was introduced to the public in 1995 and has gained wide acceptance among recreational spearfishermen as well.

The Commercial gun was designed primarily as a bottom gun or a working gun, as some prefer to call it. However, the commercial gun is also versatile enough to be used as a free diving gun.


See a larger photo of the commercial speargun.



Commercial Muzzle: The Commercial muzzle is the main feature of the Commercial gun. The muzzle is designed to keep the shaft perfectly straight as it travels down the barrel and exits the muzzle, regardless of the angle of the shot. The result is incredible shot to shot consistency which was so important to Kevin during his commercial career. The dedicated band slots pin the bands in one position which is an important feature when single band freeshafting. The bands will not flip position while loading. This feature allows you to select one of three different power options. (See commercial band description below).

Features

  • Quickly Change From Lineshaft to Freeshaft During the Dive
  • One Piece Solid Stock Construction
  • Superior Freeshaft Gun
  • Excellent Mid Range Lineshaft Gun
  • Easily Carry Two Shafts
  • Pro Series Commercial Muzzle
  • Spare Shaft Holder
  • 750 lb. Single Loop Mono Line Kit
  • Optional Left or Right Hand Set-Up
  • User Friendly Design

Basic Concepts of the Commercial Gun

  • Freeshaft Because You Want To
  • Lineshaft Because You Need To
  • Shoot with Precision / Reduce Missed Shots
  • Simplify the Gear / Ease of Operation
  • Reload Quickly / Maximize Opportunities
  • Versatility / Durability / Dependability
Click for a
larger view

Lineshaft / Freeshaft Capability
The Commercial gun is also equipped with our exclusive "Single Loop" line system. The line is made using 750lb test monofilament, which is very durable. The line can be stowed under the barrel of the gun while freeshafting. If you need to change to lineshaft, simply pop the line off the retaining clip installed on the butt, pull the spare shaft out of the holder, and drop the lineshaft into the gun. You can easily change from freeshaft to lineshaft in 10 to 15 seconds!

The Commercial gun is also a versatile lineshaft gun. The gun excels in low to medium visibility conditions. There is enough line on the gun to shoot about two times the length of the shaft off the end of the gun. This is ample line for shooting in low to medium visibility. The single loop line is very quick to reload because there is no time consuming wrapping sequence. You simply place the line in the clip mounted under the barrel, load the bands, and shoot! The single loop line speeds up the reloading cycle and absolutely will not tangle.


Click the butt end of the gun for an exploded view

Click the tip end of the gun for an exploded view

C102 - Spare Shaft Holder for 5/16" dia. Shafts

Exploded View of C102 Shaft Holder

Features   

  • No Moving Parts
  • Failsafe Design
  • Easy Installation
  • No More Lost Shafts
  • Lifetime Guarantee
  • Fits 5/16" dia. Shafts

Our spare shaft holder is the highest quality, most reliable spare shaft holder available today. It features a very simple, but effective design concept with no moving parts! The complete assembly installs in just a few minutes and only requires three #8 wood screws.

The shaft is held in the rear tension assembly using a short piece of soft vinyl tubing suspended in a specially machined plastic tube made of durable DuPont "Delrin." A thin rubber shim is placed next to the soft rubber tubing so the tension of the shaft holder can be adjusted if necessary. The rear tension assembly has no moving parts which greatly reduces the possibly of losing a shaft. The shaft holder is constructed with all plastic components and carries a 100% lifetime guarantee

The only maintenance the shaft holder requires is to apply a thin layer of bearing grease or a similar lubricant to the trigger end of all the shafts you plan to use. This lubricates the rear tension assembly every time the shaft is inserted. Without the lubricant the shaft may become difficult to insert or remove from the holder.

Click here for more information on the spare shaft holder.


Hi-Vis Yellow Butt is Standard on Commercial Rhino Guns, may be substituted on Commercial Mahogany and Teak Guns.

The new Hi-Vis yellow gun butt and bands are the latest addition for Sea Hornet wood spearguns. The Hi-Vis yellow color is a safety feature to help spot a diver who has surfaced away from the boat, as well as a locating feature in case the gun floats to the surface.

The Rhino is the first speargun on the market to offer Hi-Vis components as a safety feature as well as a performance function in low visibility conditions.

Commercial Speargun Accessories


Commercial Muzzle — C100

C100 — Pro Series Commercial Muzzle
Can be installed on all Classic and Limited Guns

Commercial Rigging Package — C108

Commercial Rigging Components can be ordered installed on any new speargun

Single Loop Mono Kit — C104

750 lb. Test Single Loop Mono Kit

For Commercial and Classic Spearguns


R344Y — Speed Load Kit (yellow band) R344S — Speed Load Kit (black band)

Single Loop Replacement Line — C105

750 lb. Test Single Loop Mono Replacement Line for Commercial Spearguns


450 lb. Mono 100 ft. Coil

Home
Previous: Limited Spearguns
Next: Speargun Specifications

Spearfishing Specialties
St. Petersburg, Florida 33710
Phone: 727-323-7686
Fax: 727-323-1096
E-mail: info@slinginsteel.com